주요 콘텐츠로 건너뛰기

Spin Master Hatchimal Draggle Wheels Replacement

필요한 것

  1. Spin Master Hatchimal Draggle Wheels Replacement, Plastic Wing Replacement: 1 단계, 이미지 1/1
    • lay the Hatchimal on its side.

  2. Spin Master Hatchimal Draggle Wheels Replacement: 2 단계, 이미지 1/1
    • Using the plastic opening tool, push in on the purple clip.

  3. Spin Master Hatchimal Draggle Wheels Replacement: 3 단계, 이미지 1/1
    • Pull the wing off of the hatchimal.

    • The wing should come off with little resistance.

  4. Spin Master Hatchimal Draggle Wheels Replacement, Fur Replacement: 4 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement, Fur Replacement: 4 단계, 이미지 2/2
    • Cut the fur retaining zip-tie with a pair of scissors.

  5. Spin Master Hatchimal Draggle Wheels Replacement: 5 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement: 5 단계, 이미지 2/2
    • Lift the fur up until it can't go further.

  6. Spin Master Hatchimal Draggle Wheels Replacement: 6 단계, 이미지 1/3 Spin Master Hatchimal Draggle Wheels Replacement: 6 단계, 이미지 2/3 Spin Master Hatchimal Draggle Wheels Replacement: 6 단계, 이미지 3/3
    • Use the spudger tool to push up on the black clip to free it.

    • Pull the clip out.

  7. Spin Master Hatchimal Draggle Wheels Replacement: 7 단계, 이미지 1/3 Spin Master Hatchimal Draggle Wheels Replacement: 7 단계, 이미지 2/3 Spin Master Hatchimal Draggle Wheels Replacement: 7 단계, 이미지 3/3
    • Lift fur up to reveal the next set of clips.

    • Insert a spudger to push up on the black clip to free it.

    • Pull out the clip.

  8. Spin Master Hatchimal Draggle Wheels Replacement: 8 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement: 8 단계, 이미지 2/2
    • Lift the fur up and over the Hatchimals Head.

    • Remove the six 12mm Phillips #00 screws from then body.

  9. Spin Master Hatchimal Draggle Wheels Replacement: 9 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement: 9 단계, 이미지 2/2
    • Pull the casing apart.

    • Remove the yellow speaker cable.

  10. Spin Master Hatchimal Draggle Wheels Replacement: 10 단계, 이미지 1/3 Spin Master Hatchimal Draggle Wheels Replacement: 10 단계, 이미지 2/3 Spin Master Hatchimal Draggle Wheels Replacement: 10 단계, 이미지 3/3
    • Remove the three 7mm Phillips #00 screws from the head.

    • Remove the wheel base and the circuit board carefully not to damage the spring.

  11. Spin Master Hatchimal Draggle Wheels Replacement: 11 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement: 11 단계, 이미지 2/2
    • Push the six black fur clips out using the spudger.

    • Remove the fur completely.

  12. Spin Master Hatchimal Draggle Wheels Replacement, Wheel Replacement: 12 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement, Wheel Replacement: 12 단계, 이미지 2/2
    • Lift up and remove the light blue plastic casing.

  13. Spin Master Hatchimal Draggle Wheels Replacement: 13 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement: 13 단계, 이미지 2/2
    • Remove the six 7mm Phillips #00 screws.

  14. Spin Master Hatchimal Draggle Wheels Replacement: 14 단계, 이미지 1/2 Spin Master Hatchimal Draggle Wheels Replacement: 14 단계, 이미지 2/2
    • Remove the purple plastic casing. It should come off with little resistance.

    • Remove the wheel.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Humaid Alhajri

회원 가입일: 02/14/18

115 평판

안내서 1개 작성함

USF Tampa, Team S1-G5, Nance Spring 2018 USF Tampa, Team S1-G5, Nance Spring 2018 회원

USFT-NANCE-S18S1G5

3 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 8

30일 전: 14

전체 시간: 1,134