Sprinkler Head Replacement

소개

Many people have a sprinkler system and sprinkler heads tend to break occasionally. This guide will help people accomplish the task of replacing broken sprinkler heads themselves. Broken sprinkler heads can be diagnosed by the observance of poor water flow, incorrect water distribution or water shooting out like a geyser. By following the steps laid out in this guide, this project will reduce water usage and brown spots by assuring broken sprinkler heads are replaced properly.

필요한 것

1 단계 Sprinkler Head

Sprinkler Head Replacement, Sprinkler Head: 1 단계, 이미지 1/1

Turn off the water supply to the sprinklers.
This process will vary depending on your sprinkler controller.

번역하기

2 단계

Find where the water supply feeds the sprinkler system and close the valve in the event of emergency or unforeseen circumstances.

번역하기

3 단계

Dig a hole down to the base of the sprinkler head.
Be careful to avoid puncturing the sprinkler line.

번역하기

4 단계

Using your hand or a gardening trowel, finish digging so that the sprinkler head is fully visible and is clear of dirt and debris.

번역하기

5 단계

Unscrew the sprinkler head from the line it is attached to.
If is loose enough you may not need pliers.

번역하기

6 단계

Coat the threads of the water line with teflon tape to avoid leaking.

번역하기

7 단계

Using your hand, screw the new sprinkler head on over the teflon tape.
Once the sprinkler head is hand tight, use pliers to tighten it by another half turn.

번역하기