Stagg Electro-Acoustic Guitar Strings Replacement - iFixit 수리 안내서

소개

This guide will you show the proper steps to change the strings on your Stagg Electro-Acoustic Guitar. For this guide you will need a guitar string winder and cutter, as well as your preferred brand of guitar string. This guide will only show how to replace one string but can be repeated to change all of them.

필요한 것

1 단계 Guitar Strings

Stagg Electro-Acoustic Guitar Strings Replacement, Guitar Strings: 1 단계, 이미지 1/1

Place the string winder on the tuning key.

2 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 2 단계, 이미지 1/1

Wind up the string winder counter-clockwise to loosen the strings.

3 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 3 단계, 이미지 1/1

With the string clipper, clip the string under the neck of the guitar.

4 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 4 단계, 이미지 1/1

Unwind the string from the machine head and remove it.

5 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 5 단계, 이미지 1/1

With the string winder pop the string peg out of its hole.

6 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 6 단계, 이미지 1/1

Place the colored circle end of the string in the peg hole.

7 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 7 단계, 이미지 1/1

Put the peg in the hole with the string.
Pull the string while pushing the pin in.

8 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 8 단계, 이미지 1/1

Precut the other side of the string by one and a half machine heads.

9 단계

Stagg Electro-Acoustic Guitar Strings Replacement: 9 단계, 이미지 1/1

Thread the string through the peg.
Wind the string clockwise from top to bottom with the string winder.
Do not overlap the string when winding it.

결론

Repeat steps for each string.

작성자

다른 기여자 1명과 함께

Imanuel Martinez

회원 가입일: 09/15/20

169 평판

안내서 1개 작성함

팀

University of Memphis, Team S3-G10, Willis Fall 2020 University of Memphis, Team S3-G10, Willis Fall 2020 회원

Community

1 회원

안내서 1개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 9

전체 시간: 399