기기를 수리하세요 커뮤니티 상점

Starbucks Barista Ready Light Replacement

소개

The ready light is a simple LED that shows when the Barista has heated up to its needed temperature. This LED may burn out or its connectors may loosen.

필요한 것

  1. Starbucks Barista Ready Light Replacement, Ready Light: 1 단계, 이미지 1/2 Starbucks Barista Ready Light Replacement, Ready Light: 1 단계, 이미지 2/2

    • Unscrew the 6 screws from the back panel.

    • Remove the back panel.

    편집

  3. Starbucks Barista Ready Light Replacement: 2 단계, 이미지 1/3 Starbucks Barista Ready Light Replacement: 2 단계, 이미지 2/3 Starbucks Barista Ready Light Replacement: 2 단계, 이미지 3/3

    • Locate the ready light.

    • Gently push the fixture against the Barista wall.

    • Pull the fixture straight up to release it.

    • Note: The fixture works as a spring.

    • Note: The green cover from the front panel will "pop" off. Do not lose the green cover.

    • Disconnect the wire lead connectors.

    • Remove the ready light unit (fixture).

    편집

  4. Starbucks Barista Ready Light Replacement: 3 단계, 이미지 1/1

    • Replace the old LED with a new LED.

    • To put back, match the green cover to the slot of the LED fixture, then slide the fixture down against the barista wall.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

David

회원 가입일: 01/28/11

739 평판

안내서 3개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team 4-42, Regan Winter 2011 Cal Poly, Team 4-42, Regan Winter 2011 회원

CPSU-REGAN-W11S4G42

4 회원들

안내서 5개 작성하였습니다

댓글 4개

Youth and sports for

Rich Ridout - 답글

Where can I get a new LED bulb?

Paula - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 9

전체 시간: 6,094