SteelSeries Apex 3 TKL Rubber Membrane Replacement - iFixit 수리 안내서

소개

Here is a guide on how to replace or realign a rubber membrane in a SteelSeries Apex 3 TKL. This guide will be helpful if some of your keys are not working and they are starting to stick. Making sure the rubber membrane is perfectly aligned to the back of the keys could be a solution to your problem.

필요한 것

1 단계 Back Panel

SteelSeries Apex 3 TKL Rubber Membrane Replacement, Back Panel: 1 단계, 이미지 1/1

Use a JIS #00 screwdriver to remove all back panel screws.

2 단계

SteelSeries Apex 3 TKL Rubber Membrane Replacement: 2 단계, 이미지 1/2

SteelSeries Apex 3 TKL Rubber Membrane Replacement: 2 단계, 이미지 2/2

Use the iFixit opening pick to pry open the back panel by running it along the edges of the keyboard.

3 단계 Rubber Membrane

SteelSeries Apex 3 TKL Rubber Membrane Replacement, Rubber Membrane: 3 단계, 이미지 1/1

Lift off the rubber membrane.
When replacing, make sure the back stubs align with the back of each key on the keyboard.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Tyler Pepe

회원 가입일: 03/20/24

169 평판

안내서 2개 작성하였습니다

팀

UMass Dartmouth, Team 1-3, Santin Spring 2024 UMass Dartmouth, Team 1-3, Santin Spring 2024 회원

UMASSD-SANTIN-S24S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 7

전체 시간: 16