주요 콘텐츠로 건너뛰기

기기를 고치세요

수리할 권리

부품 & 도구

소개

Prereq-only guide for disconnecting the supply tube from a gravity flush toilet.

  1. Shut off the stop valve underneath the toilet by turning it clockwise until it becomes tight. The appearance of this valve may differ from toilet to toilet, but most operate the same.
    • Shut off the stop valve underneath the toilet by turning it clockwise until it becomes tight.

    • The appearance of this valve may differ from toilet to toilet, but most operate the same.

  2. Place a bucket under the supply tube to catch any dripping water. Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank. Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.
    • Place a bucket under the supply tube to catch any dripping water.

    • Turn the coupling nut on the supply tube clockwise until it releases from the threaded shank on the bottom of the tank.

결론

To reassemble your device, follow these instructions in reverse order.

Ron Davis

회원 가입일: 2015년 02월 17일

23,252 평판

안내서 13개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 84