주요 콘텐츠로 건너뛰기

Suzuki FA50 Moped Exhaust Pipe Replacement

필요한 것

  1. Suzuki FA50 Moped Exhaust Pipe Replacement, Exhaust Pipe: 1 단계, 이미지 1/1
    • Use a #2 Phillips screwdriver to remove the heat shield from the muffler.

  2. Suzuki FA50 Moped Exhaust Pipe Replacement: 2 단계, 이미지 1/1
    • There are two 10 mm hex nuts attaching the muffler to the engine. Make sure you remove both of them before proceeding to the next step.

    • Use a 10 mm socket wrench to unscrew the two hex nuts.

  3. Suzuki FA50 Moped Exhaust Pipe Replacement: 3 단계, 이미지 1/1
    • Use a 12 mm socket wrench to unscrew the third and final hex nut that holds the muffler in place.

    • Make sure to support the muffler with your hand while removing this nut, otherwise it may just fall to the floor.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Miroslav Djuric

158,173 평판

안내서 144개 작성하였습니다

댓글 한 개

Thanks you very much! Happy Fourth of July.

D4Tay - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 6,772