소개
This guide uses incorrect tools. Use an ESD safe tool, such as a nylon spudger, to complete steps that involve delicate internal components.
필요한 것
-
-
-
Disconnect ribbon
-
Rotate screwdriver to peel sticker from ribbon.
-
Place spudger head behind gray tabs on port.
-
Press outward to disengage tab.
-
Repeat on other side.
-
Slide out ribbon.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.