기기를 수리하세요 커뮤니티 상점

Tagital T10 Power button Replacement

소개

The power button is located at the top of your device, by the camera. This button can deteriorate over time or by rough handling, preventing the device from powering on and off or entering sleep mode. To fix this, the power button must be replaced.

필요한 것

  1. Tagital T10 Power button Replacement, Power button: 1 단계, 이미지 1/1

    • Always make sure your device is completely powered off before performing repairs.

    • Remove the two 4 mm Phillips head screws at the top of the tablet.

    편집

  2. Tagital T10 Power button Replacement: 2 단계, 이미지 1/1

    • Carefully remove the back cover by using a plastic opening tool, moving all the way around the perimeter of the tablet.

    • Set the back cover aside.

    • The speakers are attached to the inside back cover, and are connected by wires to the motherboard of the tablet. Carefully set the back cover aside so that you do not rip the wires free.

    편집

  3. Tagital T10 Power button Replacement: 3 단계, 이미지 1/1

    • Remove all of the 4mm screws that attach the display screen to the back of the touch screen with brackets.

    • There should be a total of 8 screws and at size PH000.

    편집

  5. Tagital T10 Power button Replacement: 4 단계, 이미지 1/2 Tagital T10 Power button Replacement: 4 단계, 이미지 2/2

    • Remove all of the 4mm screws that attach the motherboard to the rest of the device.

    • One screw is located beneath the black tape that holds the rear-facing camera in place. Peel the tape up to access it.

    • There should be a total of 7 screws at size PH000.

    편집

  6. Tagital T10 Power button Replacement: 5 단계, 이미지 1/2 Tagital T10 Power button Replacement: 5 단계, 이미지 2/2

    • Locate the 2 ZIF connectors.

    • Flip up the black tab to release the two filaments, so that they are no longer connected to the motherboard.

    편집

  7. Tagital T10 Power button Replacement: 6 단계, 이미지 1/2 Tagital T10 Power button Replacement: 6 단계, 이미지 2/2

    • Locate the notification light on the upper corner of the device.

    • Gently pull on the wires to remove the light from it's housing.

    편집

  8. Tagital T10 Power button Replacement: 7 단계, 이미지 1/1

    • Remove the motherboard from the back of the display screen.

    • Some wires are still attached to the device, so carefully set it to the side.

    편집

  9. Tagital T10 Power button Replacement: 8 단계, 이미지 1/2 Tagital T10 Power button Replacement: 8 단계, 이미지 2/2

    • Push the power button towards the interior of the device to free it from its slot, using tweezers.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Destin Dawsy

회원 가입일: 09/26/16

328 평판

안내서 2개 작성하였습니다

배지: 10

배지 +7개 더

팀

USF Tampa, Team 14-5, Eyestone Fall 2016 USF Tampa, Team 14-5, Eyestone Fall 2016 회원

USFT-EYESTONE-F16S14G5

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 311