기기를 수리하세요 커뮤니티 상점

Tatung TAC-6G Light Element Replacement

소개

The device contains small lights that indicate whether the rice is cooking or being kept warm. In this guide we will the expose the light bulb circuitry to check if it is broken and replace the light bulbs if necessary.

필요한 것

  1. Tatung TAC-6G Light Element Replacement, Light Element: 1 단계, 이미지 1/1

    • Start with the device standing upright.

    편집

  2. Tatung TAC-6G Light Element Replacement: 2 단계, 이미지 1/1

    • Remove the 11mm Phillips screw from below the power component panel.

    편집

  3. Tatung TAC-6G Light Element Replacement: 3 단계, 이미지 1/1

    • Pull the panel away from the rice cooker.

    • Remove the 9mm Phillips screw from behind the power component dashboard that is connected to the light plate.

    편집

  4. Tatung TAC-6G Light Element Replacement: 4 단계, 이미지 1/1

    • Pull the light plate from the power component panel.

    편집

  6. Tatung TAC-6G Light Element Replacement: 5 단계, 이미지 1/1

    • Flip the rice cooker device upside down.

    편집

  7. Tatung TAC-6G Light Element Replacement: 6 단계, 이미지 1/2 Tatung TAC-6G Light Element Replacement: 6 단계, 이미지 2/2

    • Remove the one 7mm Phillips screw from the side of the brass panel

    • Lift the brass plate off of the device and set it aside.

    편집

  8. Tatung TAC-6G Light Element Replacement: 7 단계, 이미지 1/1

    • Remove the 7mm Phillips screw holding the white and maroon colored wires that are connected to the heating element.

    편집

  9. Tatung TAC-6G Light Element Replacement: 8 단계, 이미지 1/1

    • Remove the 10mm Phillips screw that connects the white, blue and black wires to the white plastic piece in the corner of the device.

    편집

  10. Tatung TAC-6G Light Element Replacement: 9 단계, 이미지 1/1

    • Remove the 7mm Phillips screw that connects two white wires and one red wire to the heating "warm" switch.

    편집

  11. Tatung TAC-6G Light Element Replacement: 10 단계, 이미지 1/1

    • Using your hand, pull out the light plate with the maroon red and black wires.

    편집

  12. Tatung TAC-6G Light Element Replacement: 11 단계, 이미지 1/1

    • Replace the light plate dashboard.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Erin Charles

회원 가입일: 01/28/16

215 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

University of Alabama, Team 1-6, Sydow campbell Spring 2016 University of Alabama, Team 1-6, Sydow campbell Spring 2016 회원

UA-SYDOW CAMPBELL-S16S1G6

4 회원들

안내서 3개 작성하였습니다

댓글 한 개

Reverse the steps for reassembly.

Tom Anderson - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 621