메인 콘텐츠로 스킵하기

소개

This guide will help you replace your faulty volume knob. This guide should only be looked at after completing the Disassembly Guide.

부품

지정된 부품이 없습니다.

  1. Remove the screws that are holding the circuit board in place. Remove the screws that are holding the circuit board in place.
    • Remove the screws that are holding the circuit board in place.

  2. Pull the circuit board out to reveal the inside of the display. Pull the circuit board out to reveal the inside of the display.
    • Pull the circuit board out to reveal the inside of the display.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place. Remove the screws and the black piece that are holding the volume control knob in place.
    • Remove the screws and the black piece that are holding the volume control knob in place.

  5. Pull the volume control knob from the outside and the white piece on the inside until they separate. Replace the volume knob with a new one to complete the repair.
    • Pull the volume control knob from the outside and the white piece on the inside until they separate.

    • Replace the volume knob with a new one to complete the repair.

결론

To reassemble your device, follow these instructions in reverse order and follow the disassembly guide instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Oliver Kunz

회원 가입일: 2012년 09월 26일

107 평판

안내서 1개 작성함

Cal Poly, Team 2-61, Propen Fall 2012 Cal Poly, Team 2-61, Propen Fall 2012 회원

CPSU-PROPEN-F12S2G61

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 14

전체 시간: 3,400