기기를 수리하세요 커뮤니티 상점

Texas Instruments TI-83 Plus Back Case Replacement

소개

If your back case is cracked or broken this guide will show you how it is removed and replaced.

필요한 것

  1. Texas Instruments TI-83 Plus Back Case Replacement, Backup Battery: 1 단계, 이미지 1/2 Texas Instruments TI-83 Plus Back Case Replacement, Backup Battery: 1 단계, 이미지 2/2

    • Remove the battery cover.

    • Remove the AAA batteries from the calculator.

    편집

  2. Texas Instruments TI-83 Plus Back Case Replacement: 2 단계, 이미지 1/1

    • Remove the 5mm Philips #00 screw holding backup battery cover.

    • Remove the backup battery cover.

    편집

  4. Texas Instruments TI-83 Plus Back Case Replacement: 3 단계, 이미지 1/1

    • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

    • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

    편집

  5. Texas Instruments TI-83 Plus Back Case Replacement, Back Case: 4 단계, 이미지 1/1

    • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

    편집

  6. Texas Instruments TI-83 Plus Back Case Replacement: 5 단계, 이미지 1/2 Texas Instruments TI-83 Plus Back Case Replacement: 5 단계, 이미지 2/2

    • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 5명과 함께

Jared

회원 가입일: 10/02/12

151 평판

안내서 2개 작성하였습니다

배지: 11

배지 +8개 더

팀

Cal Poly, Team 18-37, Regan Fall 2012 Cal Poly, Team 18-37, Regan Fall 2012 회원

CPSU-REGAN-F12S18G37

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 25

전체 시간: 9,783