주요 콘텐츠로 건너뛰기

Texas Instruments TI-83 Plus Keyboard Mat Replacement

필요한 것

  1. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Backup Battery: 1 단계, 이미지 1/2 Texas Instruments TI-83 Plus Keyboard Mat Replacement, Backup Battery: 1 단계, 이미지 2/2
    • Remove the battery cover.

    • Remove the AAA batteries from the calculator.

  2. Texas Instruments TI-83 Plus Keyboard Mat Replacement: 2 단계, 이미지 1/1
    • Remove the 5mm Philips #00 screw holding backup battery cover.

    • Remove the backup battery cover.

  3. Texas Instruments TI-83 Plus Keyboard Mat Replacement: 3 단계, 이미지 1/1
    • Use plastic opening tool to remove the backup battery. Place the tool in the small cut-out next to the battery and pry the battery out.

    • Be careful, the backup battery is spring loaded and may shoot up when you remove it.

  4. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Back Case: 4 단계, 이미지 1/1
    • Unscrew the six 7.5mm T6 screws on the back case. You will need to use a screwdriver with a long and skinny head.

  5. Texas Instruments TI-83 Plus Keyboard Mat Replacement: 5 단계, 이미지 1/2 Texas Instruments TI-83 Plus Keyboard Mat Replacement: 5 단계, 이미지 2/2
    • Pry back case off. Insert the plastic opening tool in the track for the protective cover and pry the halves of the case apart.

  6. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Motherboard & Screen: 6 단계, 이미지 1/2 Texas Instruments TI-83 Plus Keyboard Mat Replacement, Motherboard & Screen: 6 단계, 이미지 2/2
    • Keep the screen face-down during this step. Only the motherboard is attached to the face-plate and the screen may fall out.

    • Remove the eight (8) 5mm Philips #00 screws on the motherboard.

  7. Texas Instruments TI-83 Plus Keyboard Mat Replacement: 7 단계, 이미지 1/2 Texas Instruments TI-83 Plus Keyboard Mat Replacement: 7 단계, 이미지 2/2
    • Carefully remove the motherboard and screen. Grab the board by its side with one hand and the screen with the other. Carefully lift the two parts up.

    • Keep the face-plate face-down to prevent the keys from falling out.

  8. Texas Instruments TI-83 Plus Keyboard Mat Replacement, Keyboard Mat: 8 단계, 이미지 1/2 Texas Instruments TI-83 Plus Keyboard Mat Replacement, Keyboard Mat: 8 단계, 이미지 2/2
    • Remove light gray rubber keyboard mat.

    • Keep your calculator face down to ensure the individual keys do not fall out.

  9. Texas Instruments TI-83 Plus Keyboard Mat Replacement: 9 단계, 이미지 1/1
    • Clean the contacts on the keyboard with a soft cloth.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

corey

회원 가입일: 10/02/12

11 평판

안내서 1개 작성함

Cal Poly, Team 18-37, Regan Fall 2012 Cal Poly, Team 18-37, Regan Fall 2012 회원

CPSU-REGAN-F12S18G37

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 16

전체 시간: 4,591