기기를 수리하세요 커뮤니티 상점

The Beatles Rock Band Drum Set Drum Pad Replacement

소개

Before beginning the drum pad replacement. Remember to be careful when following the steps. The drum pads may seem difficult to pry off at first, but just remember that it is okay to apply more force if needed as long as its applied responsibly. Play close attention to the specific wires and parts that are being emphasized in the steps.

필요한 것

  1. The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: 1 단계, 이미지 1/2 The Beatles Rock Band Drum Set Drum Pad Replacement, Drum Pad: 1 단계, 이미지 2/2

    • Pry the drum pad off of the drum set.

    • This will take significant force, but the rubber on the drum pad can withstand the force.

    편집

  2. The Beatles Rock Band Drum Set Drum Pad Replacement: 2 단계, 이미지 1/2 The Beatles Rock Band Drum Set Drum Pad Replacement: 2 단계, 이미지 2/2

    • Remove the small wire clip shown in the picture.

    • If this wire is already disconnected, that is most likely the cause for the drum pad not working.

    편집

  4. The Beatles Rock Band Drum Set Drum Pad Replacement: 3 단계, 이미지 1/1

    • Remove the four Phillips size J0 screws supporting the hit sensor.

    • There is a small plastic disk and a spring in the support; be sure not to lose it.

    편집

  5. The Beatles Rock Band Drum Set Drum Pad Replacement: 4 단계, 이미지 1/1

    • The sensor can be peeled off of the drum pad.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Zach Richter

회원 가입일: 01/24/17

549 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

Cal Poly, Team 13-3, Banghart Winter 2017 Cal Poly, Team 13-3, Banghart Winter 2017 회원

CPSU-BANGHART-W17S13G3

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

Where can you buy replacement sensor?

Barry Howard - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 9

30일 전: 71

전체 시간: 7,897