주요 콘텐츠로 건너뛰기

The Internal Components of an Atari Lynx

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. The Internal Components of an Atari Lynx, Atari Lynx: 1 단계, 이미지 1/1
    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

  2. The Internal Components of an Atari Lynx: 2 단계, 이미지 1/1
    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

  3. The Internal Components of an Atari Lynx: 3 단계, 이미지 1/1
    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

  4. The Internal Components of an Atari Lynx: 4 단계, 이미지 1/1
    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

결론

To reassemble your device, follow these instructions in reverse order.

John Lopez

회원 가입일: 01/27/14

443 평판

안내서 4개 작성하였습니다

Cal Poly, Team 1-42, Maness Winter 2014 Cal Poly, Team 1-42, Maness Winter 2014 회원

CPSU-MANESS-W14S1G42

5 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 93