기기를 수리하세요 커뮤니티 상점

ThinkPad X1 Carbon Push Button Controls Replacement

소개

In this guide the push button is replaced. If the button is no longer working or the button is sticky this is the guide for you.

필요한 것

  1. ThinkPad X1 Carbon Push Button Controls Replacement, Push Button Controls: 1 단계, 이미지 1/1

    • Unscrew the seven screws located on the back of the device.

    편집

  2. ThinkPad X1 Carbon Push Button Controls Replacement: 2 단계, 이미지 1/1

    • Slide the plastic the spudger along the edge of the device to separate the keyboard tray.

    편집

  3. ThinkPad X1 Carbon Push Button Controls Replacement: 3 단계, 이미지 1/1

    • Flip the device over and open it to lift the keyboard tray from the body of the device.

    편집

  5. ThinkPad X1 Carbon Push Button Controls Replacement: 4 단계, 이미지 1/1

    • Use the Plastic Spudger to gently release the ribbon cable attached to the keyboard.

    • Place device to side.

    편집

  6. ThinkPad X1 Carbon Push Button Controls Replacement: 5 단계, 이미지 1/3 ThinkPad X1 Carbon Push Button Controls Replacement: 5 단계, 이미지 2/3 ThinkPad X1 Carbon Push Button Controls Replacement: 5 단계, 이미지 3/3

    • Unlock and remove the 3 ribbon cables along the top of the keyboard tray.

    편집

  7. ThinkPad X1 Carbon Push Button Controls Replacement: 6 단계, 이미지 1/1

    • Locate and unscrew the 3 silver screws.

    편집

  8. ThinkPad X1 Carbon Push Button Controls Replacement: 7 단계, 이미지 1/1

    • Gently wiggle and lift the Push Button board from the keyboard tray.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Kirby Raines

회원 가입일: 01/23/18

648 평판

안내서 4개 작성하였습니다

배지: 7

배지 +4개 더

팀

Western Carolina University, Team S1-G3, Virtue Spring 2018 Western Carolina University, Team S1-G3, Virtue Spring 2018 회원

WCU-VIRTUE-S18S1G3

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 12

전체 시간: 1,438