소개

This guide describes how to replace the hard drive.

부품

부품은 필요하지 않습니다.

  1. Unscrew the five 0.31 inch T-9 screws on the back cover.
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

    댓글 쓰기

  2. Slide the cover towards the back until it is no longer under the front cover.
    • Slide the cover towards the back until it is no longer under the front cover.

    댓글 쓰기

    • Lift the cover up and off the device.

    댓글 쓰기

    • Locate the hard drive.

    댓글 쓰기

    • Remove the ribbon cable by applying firm pressure to the black tabs on the sides.

    • Remove the power cable to the right of the ribbon cable.

    댓글 쓰기

    • Unscrew the 0.31 inch T-9 screws from the hard drive and pull outwards to remove.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Talha

회원 가입일: 2011년 10월 11일

31 평판

안내서 2개 작성하였습니다

Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 회원

CPSU-AMIDO-F11S5G33

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 5

전체 시간: 1,457