주요 콘텐츠로 건너뛰기

TiVo Series 2 TCD24008A Remote Sensor Replacement

필요한 것

  1. TiVo Series 2 TCD24008A Remote Sensor Replacement, Cover: 1 단계, 이미지 1/1
    • Unscrew the five 0.31 inch T-9 screws on the back cover.

  2. TiVo Series 2 TCD24008A Remote Sensor Replacement: 2 단계, 이미지 1/1
    • Slide the cover towards the back until it is no longer under the front cover.

  3. TiVo Series 2 TCD24008A Remote Sensor Replacement: 3 단계, 이미지 1/1
    • Lift the cover up and off the device.

  4. TiVo Series 2 TCD24008A Remote Sensor Replacement, Remote Sensor: 4 단계, 이미지 1/1
    • Unplug the ribbon cable from the motherboard. Some force may be required for this step, so be careful not to rip the ribbon cable.

  5. TiVo Series 2 TCD24008A Remote Sensor Replacement: 5 단계, 이미지 1/1
    • Unscrew the two 0.31 inch T-9 screws on the inside of the front cover.

  6. TiVo Series 2 TCD24008A Remote Sensor Replacement: 6 단계, 이미지 1/3 TiVo Series 2 TCD24008A Remote Sensor Replacement: 6 단계, 이미지 2/3 TiVo Series 2 TCD24008A Remote Sensor Replacement: 6 단계, 이미지 3/3
    • Use a spudger to push the three tabs on the inside of the front cover up and forward to release the cover.

  7. TiVo Series 2 TCD24008A Remote Sensor Replacement: 7 단계, 이미지 1/1
    • Pull the front cover down and away from the device to separate it completely. Be careful not to tear the ribbon cable as you are removing the front cover.

  8. TiVo Series 2 TCD24008A Remote Sensor Replacement: 8 단계, 이미지 1/1
    • Unscrew the two 0.31 inch T-9 screws on the back of the sensor.

  9. TiVo Series 2 TCD24008A Remote Sensor Replacement: 9 단계, 이미지 1/1
    • Lift the sensor up to remove it.

결론

To reassemble your device, follow these instructions in reverse order.

Shauna

회원 가입일: 10/10/11

37 평판

안내서 2개 작성하였습니다

Cal Poly, Team 5-33, Amido Fall 2011 Cal Poly, Team 5-33, Amido Fall 2011 회원

CPSU-AMIDO-F11S5G33

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 1,009