부품은 필요하지 않습니다.
Power down the TiVo and detach the power cable from the rear of the unit.
Remove the five T10 screws from the rear of the case using the Torx screwdriver.
Lift up and pull back the outer casing towards the rear of the unit.
The fan is held in by four T15 screws on the rear of the device.
Take the wound red and black wires coming from the fan and follow them back to the logic board.
Unplug the connector from the motherboard.
Pull the fan towards the front and out of the TiVo unit.
해당 안내서 퍼가기
해당 안내서를 사이트/포럼에 작은 위젯으로 포함하려면 크기를 선택하고 아래 코드를 복사하십시오.