기기를 수리하세요 커뮤니티 상점

Tineco FLOOR ONE S3 Breeze Brush Roller Replacement

소개

The Tineco FLOOR ONE S3 Breeze (model no. FW007600US) will sometimes have problems with the brush roller wearing out over time, and it may need to be replaced by removing the brush roller cover and removing the existing brush roller. After a quick reassembly the machine is ready to operate. This replacement guide contains the following steps for the brush roller replacement.

  1. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: 1 단계, 이미지 1/2 Tineco FLOOR ONE S3 Breeze Brush Roller Replacement, Brush Roller: 1 단계, 이미지 2/2

    • Place a finger on the lever located on the brush roller cover.

    • Firmly push the lever with a finger to remove the brush roller cover.

    번역하기

  3. Tineco FLOOR ONE S3 Breeze Brush Roller Replacement: 2 단계, 이미지 1/1

    • Grasp the brush roller on its side.

    • Pull the brush roller out of its initial position.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Dawoud Daoud

회원 가입일: 02/14/24

199 평판

안내서 2개 작성하였습니다

배지: 3

팀

University of Memphis, Team 3-5, Sneed Spring 2024 University of Memphis, Team 3-5, Sneed Spring 2024 회원

UM-SNEED-S24S3G5

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 79