기기를 수리하세요 커뮤니티 상점

Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement

소개

Use this guide to replace the bypass valve assembly in your Titan Impact 410 Airless Sprayer.

필요한 것

  1. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: 1 단계, 이미지 1/2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Safety precautions: 1 단계, 이미지 2/2

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    편집

  2. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: 2 단계, 이미지 1/3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: 2 단계, 이미지 2/3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the valve handle: 2 단계, 이미지 3/3

    • Use a flat punch tool and a hammer to tap the groove pin from left to right out of the valve handle.

    편집

  4. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: 3 단계, 이미지 1/2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement: 3 단계, 이미지 2/2

    • Remove the valve handle from the cam base.

    • During reassembly, apply grease to the cam base before reattaching the valve handle.

    편집

  5. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: 4 단계, 이미지 1/3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: 4 단계, 이미지 2/3 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the cam base: 4 단계, 이미지 3/3

    • Remove the cam base.

    편집

  6. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: 5 단계, 이미지 1/2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Loosen the bypass valve assembly: 5 단계, 이미지 2/2

    • Use a 13/16" wrench, or an adjustable wrench, to loosen the bypass valve assembly.

    • Rotate the wrench counterclockwise.

    편집

  7. Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: 6 단계, 이미지 1/2 Titan Airless Sprayer IMPACT 410 Bypass Valve Assembly Replacement, Remove the bypass valve assembly: 6 단계, 이미지 2/2
    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Alex Diaz-Kokaisl

회원 가입일: 01/16/22

124,044 평판

안내서 581개 작성하였습니다

배지: 34

배지 +31개 더

팀

iFixit iFixit 회원

Staff

135 회원들

안내서 17,182개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 27

전체 시간: 475