기기를 수리하세요 커뮤니티 상점

Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement

소개

Use this guide to replace the inlet valve pusher assembly in your Titan Elite 3000 High Pressure Airless Sprayer.

필요한 것

  1. Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Safety precautions: 1 단계, 이미지 1/3 Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Safety precautions: 1 단계, 이미지 2/3 Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Safety precautions: 1 단계, 이미지 3/3

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    • Lay the sprayer down horizontally before continuing.

    편집

  3. Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Loosen the valve pusher assembly: 2 단계, 이미지 1/3 Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Loosen the valve pusher assembly: 2 단계, 이미지 2/3 Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Loosen the valve pusher assembly: 2 단계, 이미지 3/3

    • Use a 17 mm socket to loosen the inlet valve pusher assembly.

    편집

  4. Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Remove the valve pusher assembly: 3 단계, 이미지 1/2 Titan High Pressure Airless Sprayer Elite 3000 Inlet Valve Pusher Assembly Replacement, Remove the valve pusher assembly: 3 단계, 이미지 2/2
    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

Alex Diaz-Kokaisl

회원 가입일: 01/16/22

125,280 평판

안내서 582개 작성하였습니다

배지: 34

배지 +31개 더

팀

iFixit iFixit 회원

Staff

137 회원들

안내서 17,457개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 10

30일 전: 24

전체 시간: 341