소개
Use this guide to replace the regulator assembly in your Titan Elite 3000 High Pressure Airless Sprayer.
필요한 것
-
-
Turn off and unplug the sprayer.
-
Lay the sprayer down horizontally before continuing.
-
-
-
Use a pick tool to scrape the red paint from the side of the pressure control knob.
-
-
-
-
Use a flathead screwdriver to pry and remove the clip securing the stop sleeve.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 4명이 해당 안내서를 완성하였습니다.