기기를 수리하세요 커뮤니티 상점

Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement

소개

Use this guide to replace the relief valve assembly in your Titan Elite 3000 High Pressure Airless Sprayer.

필요한 것

  1. Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Safety precautions: 1 단계, 이미지 1/3 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Safety precautions: 1 단계, 이미지 2/3 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Safety precautions: 1 단계, 이미지 3/3

    • Before you begin, make sure to follow the pressure relief procedure documented in the user manual before powering down the paint sprayer and disconnecting the pump.

    • Turn off and unplug the sprayer.

    • Lay the sprayer down horizontally before continuing.

    편집

  2. Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the valve handle: 2 단계, 이미지 1/3 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the valve handle: 2 단계, 이미지 2/3 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the valve handle: 2 단계, 이미지 3/3

    • Use a pin punch and a hammer to drive the groove pin from right to left out of the valve handle.

    편집

  4. Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement: 3 단계, 이미지 1/2 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement: 3 단계, 이미지 2/2

    • Pull the valve handle straight off the cam base to remove it.

    편집

  5. Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the cam base: 4 단계, 이미지 1/2 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the cam base: 4 단계, 이미지 2/2

    • Remove the cam base.

    편집

  6. Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the relief valve assembly: 5 단계, 이미지 1/3 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the relief valve assembly: 5 단계, 이미지 2/3 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement, Remove the relief valve assembly: 5 단계, 이미지 3/3

    • Use a 17 mm wrench to loosen the relief valve assembly.

    편집

  7. Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement: 6 단계, 이미지 1/2 Titan High Pressure Airless Sprayer Elite 3000 Relief Valve Assembly Replacement: 6 단계, 이미지 2/2

    • Remove the relief valve assembly.

    • Your assembly may have red threadlocker around its threads.

    • During reassembly, consider applying new threadlocker to your replacement assembly.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Alex Diaz-Kokaisl

회원 가입일: 01/16/22

125,310 평판

안내서 582개 작성하였습니다

배지: 34

배지 +31개 더

팀

iFixit iFixit 회원

Staff

137 회원들

안내서 17,462개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 17

전체 시간: 356