기기를 수리하세요 커뮤니티 상점

TomTom GO 500 Speaker Replacement

소개

The speaker is underneath the motherboard so power off the device before starting the disassembly.

필요한 것

  1. TomTom GO 500 Speaker Replacement, TomTom GO 500 Opening the Device: 1 단계, 이미지 1/1

    • Unscrew the two 3mm screws at the base of the device using the Torx T5 screwdriver.

    번역하기

  2. TomTom GO 500 Speaker Replacement: 2 단계, 이미지 1/2 TomTom GO 500 Speaker Replacement: 2 단계, 이미지 2/2

    • Using the plastic opening tools, insert one opening tool into the gap between the screen casing and the motherboard casing. Then insert the other tool into one of the adjacent sides and slide it around the top.

    • There are 14 latches that need to be undone.

    • The latches break easily during the opening process so we recommend purchasing a new screen casing if they break.

    번역하기

  3. TomTom GO 500 Speaker Replacement: 3 단계, 이미지 1/1

    • With the screen casing unlatched, locate the right side where the two connectors are.

    번역하기

  4. TomTom GO 500 Speaker Replacement: 4 단계, 이미지 1/3 TomTom GO 500 Speaker Replacement: 4 단계, 이미지 2/3 TomTom GO 500 Speaker Replacement: 4 단계, 이미지 3/3

    • Unlatch the connectors using the plastic opening tool.

    • The orange rectangular connector may have come off in the process of removing the screen casing.

    번역하기

  6. TomTom GO 500 Speaker Replacement: 5 단계, 이미지 1/2 TomTom GO 500 Speaker Replacement: 5 단계, 이미지 2/2

    • Separate the screen casing from the motherboard casing.

    번역하기

  7. TomTom GO 500 Speaker Replacement, Motherboard: 6 단계, 이미지 1/1

    • Unscrew the five 4mm screws using the Phillips #0 screwdriver.

    번역하기

  8. TomTom GO 500 Speaker Replacement: 7 단계, 이미지 1/2 TomTom GO 500 Speaker Replacement: 7 단계, 이미지 2/2
    이 단계에 사용된 도구:
    Tweezers
    $4.99
    구매

    • Unplug the connector shown near the center of the motherboard using the tweezers.

    번역하기

  9. TomTom GO 500 Speaker Replacement: 8 단계, 이미지 1/2 TomTom GO 500 Speaker Replacement: 8 단계, 이미지 2/2

    • Unplug the second connector using the plastic opening tool.

    번역하기

  10. TomTom GO 500 Speaker Replacement: 9 단계, 이미지 1/2 TomTom GO 500 Speaker Replacement: 9 단계, 이미지 2/2

    • Remove the motherboard from the casing.

    번역하기

  11. TomTom GO 500 Speaker Replacement, Speaker: 10 단계, 이미지 1/1

    • The speaker is located next to the battery.

    번역하기

  12. TomTom GO 500 Speaker Replacement: 11 단계, 이미지 1/3 TomTom GO 500 Speaker Replacement: 11 단계, 이미지 2/3 TomTom GO 500 Speaker Replacement: 11 단계, 이미지 3/3

    • Pinch the speaker at the rubber grommets and tug gently.

    번역하기

  13. TomTom GO 500 Speaker Replacement: 12 단계, 이미지 1/3 TomTom GO 500 Speaker Replacement: 12 단계, 이미지 2/3 TomTom GO 500 Speaker Replacement: 12 단계, 이미지 3/3

    • Insert the new speaker in the rubber grommet. Use the plastic opening tool to wrap the grommet over the speaker.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Nicholas Maharaj

회원 가입일: 09/22/16

101 평판

안내서 1개 작성함

배지: 3

팀

UC Davis, Team 2-5, Oliver Fall 2016 UC Davis, Team 2-5, Oliver Fall 2016 회원

UCD-OLIVER-F16S2G5

5 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 5

전체 시간: 433