기기를 수리하세요 커뮤니티 상점

TomTom Go 60 S Motherboard Replacement

소개

This guide is to help instruct how to replace the motherboard of the TomTom Go 60 S. The motherboard in the main circuit for the device.

필요한 것

  1. TomTom Go 60 S Motherboard Replacement, Motherboard: 1 단계, 이미지 1/1

    • Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.

    편집

  2. TomTom Go 60 S Motherboard Replacement: 2 단계, 이미지 1/1

    • Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device

    편집

  4. TomTom Go 60 S Motherboard Replacement: 3 단계, 이미지 1/1

    • Once the two covers are separated, use your fingers, to gently disconnect the wires that are connected to the motherboard from the back cover.

    편집

  5. TomTom Go 60 S Motherboard Replacement: 4 단계, 이미지 1/1

    • Next, you must remove the motherboard from the front screen.

    • Use a Phillips #000 screwdriver to unscrew the screws.

    편집

  6. TomTom Go 60 S Motherboard Replacement: 5 단계, 이미지 1/2 TomTom Go 60 S Motherboard Replacement: 5 단계, 이미지 2/2

    • Separate the motherboard from the front cover, you must disconnect the wires connecting the two.

    편집

  7. TomTom Go 60 S Motherboard Replacement: 6 단계, 이미지 1/1

    • The motherboard is now disconnected from the front assembly

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Ambermarie Dawdy

회원 가입일: 10/04/16

74 평판

안내서 2개 작성하였습니다

배지: 12

배지 +9개 더

팀

USF Tampa, Team 1-6, Nance Fall 2016 USF Tampa, Team 1-6, Nance Fall 2016 회원

USFT-NANCE-F16S1G6

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

What is the purpose of single yellow wire ?

is it ok if it is disconnected ? I fear to have unsoldered it or is it just an alone wire ?

Thanks

ugo ceruti - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 8

30일 전: 19

전체 시간: 1,210