기기를 수리하세요 커뮤니티 상점

TomTom Go 60 S Speaker Replacement

소개

If you need to replace the speaker of your TomTom Go 60 S, use this guide. After removing the covering for the device, the button cell battery will be located underneath the motherboard.

Before you begin the repair, turn off the device and disconnect the battery from the motherboard.

필요한 것

  1. TomTom Go 60 S Speaker Replacement, Speaker: 1 단계, 이미지 1/1

    • Use the iFixit opening tool to pry open the TomTom Go 60 S. Start from a corner and drag the tool around the device.

    편집

  2. TomTom Go 60 S Speaker Replacement: 2 단계, 이미지 1/1

    • Disconnect the screen from the motherboard by removing the yellow ribbon connector from the socket.

    편집

  4. TomTom Go 60 S Speaker Replacement: 3 단계, 이미지 1/1

    • Remove all six screws from the motherboard with a Philips #000 screwdriver.

    편집

  5. TomTom Go 60 S Speaker Replacement: 4 단계, 이미지 1/2 TomTom Go 60 S Speaker Replacement: 4 단계, 이미지 2/2

    • Disconnect the battery and speaker ribbon cables from the motherboard.

    편집

  6. TomTom Go 60 S Speaker Replacement: 5 단계, 이미지 1/2 TomTom Go 60 S Speaker Replacement: 5 단계, 이미지 2/2

    • Use a spudger to remove the speaker from back case.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Tomy Peralta

회원 가입일: 10/04/16

133 평판

안내서 3개 작성하였습니다

배지: 6

배지 +3개 더

팀

USF Tampa, Team 1-6, Nance Fall 2016 USF Tampa, Team 1-6, Nance Fall 2016 회원

USFT-NANCE-F16S1G6

4 회원들

안내서 5개 작성하였습니다

댓글 2개

This is not a button cell battery, it is a speaker

Jurgen Bullaert - 답글

Hi @jurgenbullaert, Good catch. We've corrected the errors in the guide. Thanks for your help!

Sarah Westberg -

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 1,412