주요 콘텐츠로 건너뛰기

TomTom ONE Speaker Replacement

필요한 것

  1. TomTom ONE Speaker Replacement, Speaker: 1 단계, 이미지 1/1
    • Use a T-9 Torx screwdriver to unscrew the four screws on the back cover.

  2. TomTom ONE Speaker Replacement: 2 단계, 이미지 1/2 TomTom ONE Speaker Replacement: 2 단계, 이미지 2/2
    • Using the spudger, gently pry apart the back case from the front case. It is easier to start on a side and work your way around the device.

  3. TomTom ONE Speaker Replacement: 3 단계, 이미지 1/1
    • Carefully pull the back cover apart from the front cover. Be careful not to pull too hard because there are two sets of wires connecting the device.

  4. TomTom ONE Speaker Replacement: 4 단계, 이미지 1/1
    • Once the two covers are separated, use the tweezers, or even your fingers, to gently disconnect the two sets of wires that are connected to the motherboard from the back cover. You may have to wiggle the wires a little bit to get them to disconnect.

  5. TomTom ONE Speaker Replacement: 5 단계, 이미지 1/2 TomTom ONE Speaker Replacement: 5 단계, 이미지 2/2
    • Take the spudger and pry out the speaker.

    • When taking out the speaker, the entire plastic shock mounting casing will come out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Becca

회원 가입일: 04/16/10

211 평판

안내서 2개 작성하였습니다

Cal Poly, Team 7-7, Maness Spring 2010 Cal Poly, Team 7-7, Maness Spring 2010 회원

CPSU-MANESS-S10S7G7

4 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 2

전체 시간: 9,522