주요 콘텐츠로 건너뛰기

소개

This guide will teach you how to replace the battery of the TOMTOM XL if the battery is dead or malfunctioning.

부품

지정된 부품이 없습니다.

  1. Remove the 4 .4mm screws on the back of the device. Remove the 4 .4mm screws on the back of the device.
    • Remove the 4 .4mm screws on the back of the device.

  2. Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.
    • Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.

    • You can rotate TOMTOM XL to make prying back off easier.

    • Be careful not to injure the two wires connecting the pieces.

  3. After prying both halves apart, they will be connected by two wires.
    • After prying both halves apart, they will be connected by two wires.

    • Carefully set the two halves next to each other making sure not to stress or damage the wires.

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    지금 장보기
  5. Using the tweezers separate the wires connecting the battery and speaker to the mother board. Be gentle while pulling the wires out, the plugs are easily injured.
    • Using the tweezers separate the wires connecting the battery and speaker to the mother board.

    • Be gentle while pulling the wires out, the plugs are easily injured.

  6. Using metal palate knife pry the battery from the back panel.
    • Using metal palate knife pry the battery from the back panel.

  7. Place the backside of the battery on the sticky side of the double sided tape. Using the tech knife, trim the extra tape to the size of the battery. The tech knife is sharp, be careful when cutting the tape.
    • Place the backside of the battery on the sticky side of the double sided tape.

    • Using the tech knife, trim the extra tape to the size of the battery.

    • The tech knife is sharp, be careful when cutting the tape.

  8. Remove the back of the double sided tap. Place the new battery back inside the back panel of TOMTOM XL. Make sure the wire from the battery is going in the correct direction.
    • Remove the back of the double sided tap.

    • Place the new battery back inside the back panel of TOMTOM XL.

    • Make sure the wire from the battery is going in the correct direction.

  9. Reconnect the battery ribbon cable to its port. Reconnect the battery ribbon cable to its port. Reconnect the battery ribbon cable to its port.
    • Reconnect the battery ribbon cable to its port.

결론

To reassemble your device, follow these instructions in reverse order.

DeVhan

회원 가입일: 2015년 03월 11일

401 평판

안내서 4개 작성하였습니다

Colorado Springs, Team 9-6, Panko Spring 2015 Colorado Springs, Team 9-6, Panko Spring 2015 회원

UCCS-PANKO-S15S9G6

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 10

전체 시간: 925