주요 콘텐츠로 건너뛰기

TomTom XL Screen and Motherboard Replacement

필요한 것

  1. TomTom XL Screen and Motherboard Replacement, Screen and Motherboard: 1 단계, 이미지 1/1
    • Slip a small plastic opening tool underneath the screen bezel, gently sliding it around the inside edge.

    • Starting at the corners, carefully pry up the screen bezel.

  2. TomTom XL Screen and Motherboard Replacement: 2 단계, 이미지 1/1
    • Remove the four Phillips #00 screws around the edge of the screen.

  3. TomTom XL Screen and Motherboard Replacement: 3 단계, 이미지 1/3 TomTom XL Screen and Motherboard Replacement: 3 단계, 이미지 2/3 TomTom XL Screen and Motherboard Replacement: 3 단계, 이미지 3/3
    • Slide a small plastic opening tool under the top portion of the metal frame and gently lift it up.

    • Slide the plastic opening tool around the inner edge of the metal frame until it feels loose.

    • It may take some time to release the frame from the housing. Some force may be necessary—but be careful not to bend the frame's fragile interior bracket.

    • Remove the frame from the housing.

  4. TomTom XL Screen and Motherboard Replacement: 4 단계, 이미지 1/2 TomTom XL Screen and Motherboard Replacement: 4 단계, 이미지 2/2
    • Lifting from the upper edge of the screen, tilt the screen away from the device.

    • Tilt the screen slowly. Flipping the screen up too quickly may damage the display cable.

  5. TomTom XL Screen and Motherboard Replacement: 5 단계, 이미지 1/2 TomTom XL Screen and Motherboard Replacement: 5 단계, 이미지 2/2
    • Remove the three Phillips #00 screws connecting the motherboard to the plastic housing:

    • Two Phillips #00 screws are located at the bottom of the first picture.

    • The third screw is hidden under the orange ribbon cable, near the screen.

    • You may have to carefully lift the screen in order to reach this screw.

  6. TomTom XL Screen and Motherboard Replacement: 6 단계, 이미지 1/2 TomTom XL Screen and Motherboard Replacement: 6 단계, 이미지 2/2
    • Flip the screen and motherboard over.

    • Gripping the plastic casing, disconnect the battery cable connector from the motherboard.

    • Disconnect the speaker cable connector from the motherboard.

    • Remove the motherboard and screen from the housing.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Adam Johnson

회원 가입일: 04/21/10

122 평판

안내서 2개 작성하였습니다

Cal Poly, Team 33-84, Johann Spring 2010 Cal Poly, Team 33-84, Johann Spring 2010 회원

CPSU-JOHANN-S10S33G84

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 9,029