1. Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.
    • Peel back the sticker, using the tweezers on the bottom of the device to reveal the two screws.

    댓글 쓰기

  2. Unscrew the two T5 screws using the T5 Torx Screwdriver.
    • Unscrew the two T5 screws using the T5 Torx Screwdriver.

    댓글 쓰기

    • Insert the flat head screwdriver into the edge of the device. Using it as a lever, carefully pry the face-plate up.

    댓글 쓰기

    • Carefully grab the ribbon cable with two fingers and pull the yellow ribbon cable upwards away from the motherboard.

    댓글 쓰기

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the screen from of the face-plate.

    댓글 쓰기

    • Insert the new screen into the face-plate.

    댓글 쓰기

    • Reattach the yellow ribbon cable to the motherboard.

    댓글 쓰기

    • Using two hands, hold both ends of the device and snap the two plates together.

    댓글 쓰기

    • Re-insert the two T5 screws and tighten.

    댓글 쓰기

    • Re-apply the label edges back down to cover the screws.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Mike Sollars

회원 가입일: 2013년 07월 11일

471 평판

안내서 3개 작성하였습니다

WRI115, Team 1-1, Ruszkiewicz Spring 2013 WRI115, Team 1-1, Ruszkiewicz Spring 2013 회원

WRI115-RUSZKIEWICZ-S13S1G1

4 회원들

안내서 3개 작성하였습니다

Hi! Thanks for doing this. How do I release the yellow cable from the board?

Shaun B - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 9

전체 시간: 1,364