부품

부품은 필요하지 않습니다.

  1. Peel back the sticker on the bottom of the device to reveal the two screws
    • Peel back the sticker on the bottom of the device to reveal the two screws

  2. Unscrew the two t-5 screws
    • Unscrew the two t-5 screws

  3. Shove the flat head screw driver into the edge of the device.  Pry the faceplate
    • Shove the flat head screw driver into the edge of the device. Pry the faceplate

  4. Release the ribbon cable
    • Release the ribbon cable

  5. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

  6. Identify the green motherboard.
    • Identify the green motherboard.

    • Unscrew the threes screws holding the board in place.

  7. Remove the board and battery from the back plate
    • Remove the board and battery from the back plate

  8. Attach the board and battery to the new back plate
    • Attach the board and battery to the new back plate

  9. Put the green motherboard back into the back plate and secure with the 3 screws
    • Put the green motherboard back into the back plate and secure with the 3 screws

  10. Snap it back together!
    • Snap it back together!

  11. insert t-5 screws and tighten
    • insert t-5 screws and tighten

  12. Replace the label to hide screws
    • Replace the label to hide screws

결론

To reassemble your device, follow these instructions in reverse order.

Mike Sollars

회원 가입일: 2013년 07월 11일

471 평판

안내서 3개 작성하였습니다

WRI115, Team 1-1, Ruszkiewicz Spring 2013 WRI115, Team 1-1, Ruszkiewicz Spring 2013 회원

WRI115-RUSZKIEWICZ-S13S1G1

4 회원들

안내서 3개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 5

전체 시간: 961