주요 콘텐츠로 건너뛰기

소개

When the charger light won’t turn on when plugged into a power source this means that the battery may need to be replaced. This guide will provide the proper instructions to replace it.

  1. Flip computer over to expose battery compartment.
    • Flip computer over to expose battery compartment.

  2. Switch tab number one in direction of arrow. Switch tab number one in direction of arrow.
    • Switch tab number one in direction of arrow.

  3. Push tab two in the opposite direction and hold it, while simultaneously lifting battery out of compartment. Push tab two in the opposite direction and hold it, while simultaneously lifting battery out of compartment.
    • Push tab two in the opposite direction and hold it, while simultaneously lifting battery out of compartment.

결론

To reassemble your device, follow these instructions in reverse order.

VivianPham0719

회원 가입일: 2019년 03월 18일

361 평판

안내서 3개 작성하였습니다

UMass Dartmouth, Team S1-G1, Botvin Spring 2019 UMass Dartmouth, Team S1-G1, Botvin Spring 2019 회원

UMASSD-BOTVIN-S19S1G1

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 73