Toshiba Satellite 1805-S177 RAM Replacement

작성자 Hannah (또 다른 기여자 6명)

댓글 0
즐겨찾기 1
완료: 4

Toshiba Satellite 1805-S177 RAM Replacement

난이도

쉬움

단계

소요 시간

3 - 5 분

소개

For the individual who constantly needs to run lots of programs at once, RAM that comes with a laptop often isn't enough. This guide shows you how to replace RAM that is either too small or gone bad.

도구

해당 도구 구매

Flathead 3/32" or 2.5 mm Screwdriver

US$6.99

구매

부품

지정된 부품이 없습니다.

1 단계 RAM

Using a Phillips screwdriver, unscrew and remove two screws labeled F4 from the plastic piece on the back of the laptop with the RAM indicator.

Using a Phillips screwdriver, unscrew and remove two screws labeled F4 from the plastic piece on the back of the laptop with the RAM indicator.

편집

2 단계

Using a flathead screwdriver or a shiv, insert the flathead of the screwdriver in the space between the plastic piece and the rest of the laptop. Pry the plastic piece off by moving the flathead screwdriver up and down.

Using a flathead screwdriver or a shiv, insert the flathead of the screwdriver in the space between the plastic piece and the rest of the laptop. Pry the plastic piece off by moving the flathead screwdriver up and down.

편집

3 단계

Using your fingers, push two shorter sides of RAM away from each other.

Note: The RAM should pop up automatically.

Using your fingers, push two shorter sides of RAM away from each other.
Note: The RAM should pop up automatically.

편집

4 단계

Using your fingers, pull RAM out of the laptop by gentling lifting up.

When reinstalling ram be sure to line up the ram correctly with the slot and notch in the ram

Using your fingers, pull RAM out of the laptop by gentling lifting up.
When reinstalling ram be sure to line up the ram correctly with the slot and notch in the ram

편집