소개

This guide will show you how to remove the current RAM module from this laptop and how to re-install a RAM module. Accessing the RAM in this computer is straightforward and requires minimal minimal dis-assembly.

  1. Turn the laptop over and locate the lock  and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.
    • Turn the laptop over and locate the lock and battery release switches. Unlock the battery by changing the switch on the right from locked to unlocked by sliding the switch outward.

    댓글 쓰기

  2. Hold the release switch and pull out the battery towards you.
    • Hold the release switch and pull out the battery towards you.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Locate the screw that is holding the back cover in place and, unscrew it using the #1 Phillips Screwdriver.

    • This screw cannot be taken out, it is a "captive" screw.

    댓글 쓰기

    • Using a plastic opening tool, pop off the back cover. Your going to insert the tool into the small slit located on the back cover piece.

    • Be careful when prying the back cover off because you may damage the cover or crack the plastic.

    댓글 쓰기

    • Locate the RAM (green module pictured here), and the two prongs on each side of the module. Press the two prongs outwardly, and pull out the RAM module.

    • Grounding yourself may be a good idea before actually touching the RAM module. This entails touching a conductive metal in order to remove any excess static energy in your body.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Lucas Salisbury

회원 가입일: 2013년 04월 18일

49 평판

안내서 3개 작성하였습니다

Cal Poly, Team 4-14, Maness Spring 2013 Cal Poly, Team 4-14, Maness Spring 2013 회원

CPSU-MANESS-S13S4G14

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 2

지난 7일: 4

지난 30일: 13

전체 시간: 773