Skip to main content

소개

In this guide, you will learn how to replace the RAM in your computer, using a screwdriver and a plastic opening tool.

  1. Click button 1 to the unlocked position.
    • Click button 1 to the unlocked position.

    • This button will have a 1 by it.

  2. Push and hold button 2 to the left. As you push button 2 to the left position, simultaneously lift up the battery pack.
    • Push and hold button 2 to the left.

    • As you push button 2 to the left position, simultaneously lift up the battery pack.

    • This button will have a 2 by it.

  3. Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws. Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.
    • Using the Phillips #1 screwdriver, remove the eleven 2.5mm screws.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Remove the one 2.5mm Phillips #1 middle plate screw.
    • Remove the one 2.5mm Phillips #1 middle plate screw.

  6. Lift up the middle vent panel.
    • Lift up the middle vent panel.

    • Set the panel to the side.

  7. Using the plastic opening tool, remove the outer panel and set to the side. Be careful not to break the back of the computer. Be careful not to break the back of the computer.
    • Using the plastic opening tool, remove the outer panel and set to the side.

    • Be careful not to break the back of the computer.

  8. Using your fingers, unclip the two side clips.
    • Using your fingers, unclip the two side clips.

  9. The RAM should now be at a 30 degree angle. Using your fingers, unclip the top two clips.
    • The RAM should now be at a 30 degree angle.

    • Using your fingers, unclip the top two clips.

    • The RAM should just pop out. You can remove it with your fingers.

    • This will apply to either top or bottom RAM.

결론

To reassemble your device, follow these instructions in reverse order.

Amber van Solingen

회원 가입일: 2018년 01월 29일

630 평판

안내서 6개 작성하였습니다

University of Alabama, Team S3-G11, Bedsole Spring 2018 University of Alabama, Team S3-G11, Bedsole Spring 2018 회원

UA-BEDSOLE-S18S3G11

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 11

전체 시간: 112