주요 콘텐츠로 건너뛰기

소개

The hard drive of a laptop is where all the data is stored. From your operating system to those pictures of your dogs, it's all located within this unassuming gizmo. If a hard drive fails, it can be catastrophic. Be sure to back up important data regularly!

  1. Unplug and power off the laptop.
    • Unplug and power off the laptop.

    • Unscrew the two 9 mm Phillips #1screws holding the battery in place.

  2. Grab the battery and pull it away from the laptop to remove it. This doesn't require a lot of effort, so you don't have to pull too hard.
    • Grab the battery and pull it away from the laptop to remove it.

    • This doesn't require a lot of effort, so you don't have to pull too hard.

  3. Unscrew the 10 9.0 mm screws holding the back panel on using a Phillips head #1 screwdriver.
    • Unscrew the 10 9.0 mm screws holding the back panel on using a Phillips head #1 screwdriver.

  4. Using a metal spudger can damage sensitive components. Insert a metal spudger tool in the seam between the back cover and the laptop itself. Gently run the spudger around the edge to pop the cover off.
    • Using a metal spudger can damage sensitive components.

    • Insert a metal spudger tool in the seam between the back cover and the laptop itself. Gently run the spudger around the edge to pop the cover off.

  5. Pry up the  back panel from the rest of the laptop using  a spudger. It is best to start around the USB port and work your way around the edge until the panel completely snaps off.
    • Pry up the back panel from the rest of the laptop using a spudger.

    • It is best to start around the USB port and work your way around the edge until the panel completely snaps off.

  6. Pull the two rubber stops upward to move them out of the way and free the hard drive.
    • Pull the two rubber stops upward to move them out of the way and free the hard drive.

  7. Slide the hard drive to the right towards the stops. This disconnects it from the motherboard.
    • Slide the hard drive to the right towards the stops. This disconnects it from the motherboard.

    • This will require some force to slide the hard drive.

  8. The hard drive can be lifted out for replacement.
    • The hard drive can be lifted out for replacement.

결론

To reassemble your device, follow these instructions in reverse order.

다른 6명이 해당 안내서를 완성하였습니다.

Greg Smith

회원 가입일: 2016년 10월 24일

311 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team 4-1, Catania Fall 2016 UMass Dartmouth, Team 4-1, Catania Fall 2016 회원

UMASSD-CATANIA-F16S4G1

2 회원들

안내서 6개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 17

30일 전: 59

전체 시간: 11,472