주요 콘텐츠로 건너뛰기

소개

This guide will aid in replacing a faulty DC power jack. A faulty power jack will prevent the laptop from conducting a charge.

부품

지정된 부품이 없습니다.

  1. Using the Phillips Head #0 Screwdriver, remove one 3mm Phillips #0 screw as indicated.
    • Using the Phillips Head #0 Screwdriver, remove one 3mm Phillips #0 screw as indicated.

  2. Remove hard drive cover. Using the Phillips Head #0 Screwdriver, remove seven 3mm Phillips #0 screws as indicated.
    • Remove hard drive cover. Using the Phillips Head #0 Screwdriver, remove seven 3mm Phillips #0 screws as indicated.

  3. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  4. Using the Phillips Head #0 Screwdriver, remove twelve 3mm Phillips #0 screw as indicated.
    • Using the Phillips Head #0 Screwdriver, remove twelve 3mm Phillips #0 screw as indicated.

  5. Using the plastic spudger, pry the back off along the periphery  of the laptop. Using the plastic spudger, pry the back off along the periphery  of the laptop.
    • Using the plastic spudger, pry the back off along the periphery of the laptop.

  6. Remove the DC power jack from its plastic retaining piece, just inside of the charger inlet. Remove the DC power jack from its plastic retaining piece, just inside of the charger inlet.
    • Remove the DC power jack from its plastic retaining piece, just inside of the charger inlet.

  7. Use the nylon spudger to remove the connecting wires from the motherboard.  Insert the spudger between the terminal plastic piece of the wire and its retaining clip on the mother board. The wire should release without much force. Use the nylon spudger to remove the connecting wires from the motherboard.  Insert the spudger between the terminal plastic piece of the wire and its retaining clip on the mother board. The wire should release without much force.
    • Use the nylon spudger to remove the connecting wires from the motherboard. Insert the spudger between the terminal plastic piece of the wire and its retaining clip on the mother board. The wire should release without much force.

결론

To reassemble your device, follow these instructions in reverse order.

Patrick Kroenung

회원 가입일: 2017년 01월 12일

122 평판

안내서 1개 작성함

Oakland University, Team 2-3, Ruskiewicz Winter 2017 Oakland University, Team 2-3, Ruskiewicz Winter 2017 회원

OAK-RUSKIEWICZ-W17S2G3

4 회원들

안내서 7개 작성하였습니다

I got a power jack from seller dcincable.com, it's exactly the same as your images show, but I could not find a service manual, it's great to have your help, thank you so much.

Tom - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 4

지난 30일: 7

전체 시간: 369