주요 콘텐츠로 건너뛰기

소개

Use this guide to replace a defective fan and heatsink in a Toshiba Satellite E45t-B4300.

부품

지정된 부품이 없습니다.

  1. Power off your laptop before continuing. Remove the following two 4mm screws with a Phillips #0 screwdriver.
    • Power off your laptop before continuing.

    • Remove the following two 4mm screws with a Phillips #0 screwdriver.

  2. Slide the battery out towards you.
    • Slide the battery out towards you.

  3. Remove the following twelve 4mm screws with a Phillips #0 screwdriver.
    • Remove the following twelve 4mm screws with a Phillips #0 screwdriver.

  4. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  5. Use a spudger to depress the six white clips connecting the plastic cover
    • Use a spudger to depress the six white clips connecting the plastic cover

  6. Run the spudger or a plastic card around the entire laptop to release the rest of the clips.
    • Run the spudger or a plastic card around the entire laptop to release the rest of the clips.

  7. Remove the cover and set to the side.
    • Remove the cover and set to the side.

  8. Remove the four 2mm screws with a Phillips #0 screwdriver.
    • Remove the four 2mm screws with a Phillips #0 screwdriver.

    • Remove the two 2mm screws with a Phillips #0 screwdriver.

  9. Use a spudger or your fingers to disconnect the fan from the motherboard.
    • Use a spudger or your fingers to disconnect the fan from the motherboard.

    • Remove the fan and heatsink.

결론

To reassemble your device, follow these instructions in reverse order.

Joshua Swanson

회원 가입일: 2017년 02월 20일

665 평판

안내서 6개 작성하였습니다

USF Tampa, Team S2-G2, Sullivan Spring 2017 USF Tampa, Team S2-G2, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S2G2

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 207