주요 콘텐츠로 건너뛰기

소개

Use this guide to replace a defective USB, HDMI, and audio jack circuit board in your Toshiba E45t-B4300.

부품

지정된 부품이 없습니다.

  1. Power off your laptop before continuing. Remove the following two 4mm screws with a Phillips #0 screwdriver.
    • Power off your laptop before continuing.

    • Remove the following two 4mm screws with a Phillips #0 screwdriver.

  2. Slide the battery out towards you.
    • Slide the battery out towards you.

  3. Remove the following twelve 4mm screws with a Phillips #0 screwdriver.
    • Remove the following twelve 4mm screws with a Phillips #0 screwdriver.

  4. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  5. Use a spudger to depress the six white clips connecting the plastic cover
    • Use a spudger to depress the six white clips connecting the plastic cover

  6. Run the spudger or a plastic card around the entire laptop to release the rest of the clips.
    • Run the spudger or a plastic card around the entire laptop to release the rest of the clips.

  7. Remove the cover and set to the side.
    • Remove the cover and set to the side.

  8. Use the point end of the spudger to lift the clips that attach the two ribbons to the motherboard. Pull out the ribbons from the motherboard. Pull out the ribbons from the motherboard.
    • Use the point end of the spudger to lift the clips that attach the two ribbons to the motherboard.

    • Pull out the ribbons from the motherboard.

  9. Unscrew the 2mm screw with a Phillips #0 screwdriver. Remove the circuit board.
    • Unscrew the 2mm screw with a Phillips #0 screwdriver.

    • Remove the circuit board.

결론

To reassemble your device, follow these instructions in reverse order.

Joshua Swanson

회원 가입일: 2017년 02월 20일

665 평판

안내서 6개 작성하였습니다

USF Tampa, Team S2-G2, Sullivan Spring 2017 USF Tampa, Team S2-G2, Sullivan Spring 2017 회원

USFT-SULLIVAN-S17S2G2

3 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 106