이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Flip the laptop over so that the backside is facing up.
-
Remove the twelve 7.8 mm long Phillips screws securing the back cover.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Use your fingers to pry the back cover up slightly near one of the display hinges.
-
Insert a plastic opening pick into the gap created between the back cover and the laptop.
-
Run the pick along the perimeter seam, twisting it as you go to release the clips holding the back cover.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Once all of the perimeter clips have been released, grasp the back cover by an edge.
-
Slowly lift the back cover away, wiggling it slightly to help release any remaining clips.
-
Remove the back cover.
-
Realign the cover onto the laptop and set the cover down in place.
-
Squeeze the edges of the cover against the laptop and press near the center to click the clips back in place.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Peel and remove the black tape holding the battery cable in place.
-
Use your fingers to grasp the battery cable near the connector and carefully pull it out of its socket.
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Remove the three 5.7 mm long Phillips screws securing the battery to the laptop.
-
Remove the battery.
-
댓글 2개
Great, thanks. Now, how to replace the keyboard? :) From what I can see (opening back), it looks like whole system has to come apart… :(
Hi Richard!
I’m not sure—I don’t have the laptop anymore. This Youtube video suggests that a keyboard replacement may be a relatively easy fix, but I can’t guarantee that. Good luck and happy fixing!