부품

부품은 필요하지 않습니다.

  1. Locate the two sliding battery locks on the underside of the laptop.
    • Locate the two sliding battery locks on the underside of the laptop.

    댓글 쓰기

  2. Locate the right battery lock and slide it to the right.
    • Locate the right battery lock and slide it to the right.

    댓글 쓰기

    • While holding the left battery lock to the left, lift up the battery using the tab located on the top center of the battery.

    댓글 쓰기

  3. Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    Fixmas/픽스마스 분위기를 띄우세요
    FIXMAS12 코드로 $50 이상 구매시 $12 할인을 받으십시오
    • Remove the battery from the laptop.

    댓글 쓰기

    • Unscrew the RAM cover and rotate the cover up to remove it. The screw should not be fully removed from the cover itself.

    댓글 쓰기

    • Push the small levers at the sides of the RAM module away from each other. The RAM module should automatically rotate upwards.

    댓글 쓰기

    • Remove the RAM module by pulling it out at the angle it was rotated to.

    댓글 쓰기

    • If you want to replace the second RAM module, apply steps 2 and 3 to do so.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order. When placing the RAM chips in, push them down until the levers snap into place after inserting them into the slot.

Ricky Baker

회원 가입일: 2014년 03월 26일

217 평판

안내서 2개 작성하였습니다

Clemson, Team 1-2, Benson Spring 2014 Clemson, Team 1-2, Benson Spring 2014 회원

CLEM-BENSON-S14S1G2

3 회원들

안내서 10개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 4

전체 시간: 320