소개

Replacing the hard drive in your laptop is a beginner level repair, which can easily be executed.

부품

부품은 필요하지 않습니다.

  1. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside. Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.
    • Unscrew the two screws holding the panel over the hard drive using a Phillips screwdriver. The panel is located on the top right of the laptop's underside.

  2. Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
    • Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove the screw located under the plastic tab. Remove the screw located under the plastic tab.
    • Remove the screw located under the plastic tab.

  5. Remove the hard drive by pulling the tab upwards and sliding the hard drive out. Remove the hard drive by pulling the tab upwards and sliding the hard drive out.
    • Remove the hard drive by pulling the tab upwards and sliding the hard drive out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Jerry Wakai

회원 가입일: 2013년 01월 31일

335 평판

안내서 4개 작성하였습니다

Cal Poly, Team 7-7, Maness Winter 2013 Cal Poly, Team 7-7, Maness Winter 2013 회원

CPSU-MANESS-W13S7G7

5 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 27

전체 시간: 2,721