소개

This guide replaces the RAM in your laptop and is fairly simple to complete.

Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.
  • Unscrew the three 4.6 mm screws holding the panel using a #1 size Phillips head screwdriver. The panel is centered on the bottom of the laptop.

댓글 쓰기

Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.
  • Remove the cover, firmly lifting from the indent. It is recommended that you leave the screws in the panel.

댓글 쓰기

  • Push the two tabs outwards, away from the RAM. The RAM should spring up.

댓글 쓰기

  • Pull the top RAM stick out gently.

  • Repeat steps 3 and 4 for the bottom RAM stick.

  • When installing the new RAM, line up the notches in the RAM's contacts and insert it at the same angle you removed it.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

Jerry Wakai

회원 가입일: 2013년 01월 31일

320 평판

안내서 4개 작성하였습니다

Cal Poly, Team 7-7, Maness Winter 2013 Cal Poly, Team 7-7, Maness Winter 2013 회원

CPSU-MANESS-W13S7G7

5 회원들

안내서 6개 작성하였습니다

Awesome & Simple! Thank-you! My Model is a Satellite P105-S6147 1GBX2 DDR2-666 Sodimm 2BG Total.

Sandra Crockett - 답글

댓글 쓰기

조회 통계:

지난 24시간: 3

지난 7일: 6

지난 30일: 16

전체 시간: 3,072