주요 콘텐츠로 건너뛰기

소개

If your hard drive has been damaged or simply want to upgrade storage space, it can be replaced with nothing other than a Phillips screwdriver. This replacement is quick and no electronic skills are necessary to succeed.

부품

지정된 부품이 없습니다.

  1. As a safety precaution, unplug the laptop and remove the battery. As a safety precaution, unplug the laptop and remove the battery.
    • As a safety precaution, unplug the laptop and remove the battery.

  2. Remove the two 3mm Phillips #0 screws on the bottom of the corner panel.
    • Remove the two 3mm Phillips #0 screws on the bottom of the corner panel.

    • The screws do not need to be removed completely from the panel, just loosened out of the sockets beneath the panel. When the screws are completely loosened, they can be left in the panel.

  3. Use the cutaway to lift the panel away from the lap top.
    • Use the cutaway to lift the panel away from the lap top.

  4. Remove the single 3mm Phillips #0 screw securing the hard drive (hard drive not pictured).
    • Remove the single 3mm Phillips #0 screw securing the hard drive (hard drive not pictured).

    • Once the screw is removed, push the hard drive up (away from the battery) to disconnect it from the laptop.

    • You are now able to lift the hard drive out of the laptop.

결론

To reassemble your device, follow these instructions in reverse order.

Carter Willson

회원 가입일: 2019년 04월 15일

241 평판

안내서 2개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 68