소개

This guide will illustrate how to replace your optical drive.

부품

부품은 필요하지 않습니다.

  1. Remove the ODD screw with a #1 Phillips head screwdriver as indicated in the picture. Using a flat edge tool, pry it the drive out of it slot from the side of the casing. You can then use your hands to continue pulling the rest the way out of its slot. Using a flat edge tool, pry it the drive out of it slot from the side of the casing. You can then use your hands to continue pulling the rest the way out of its slot.
    • Remove the ODD screw with a #1 Phillips head screwdriver as indicated in the picture.

    • Using a flat edge tool, pry it the drive out of it slot from the side of the casing. You can then use your hands to continue pulling the rest the way out of its slot.

  2. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기

    Ever fixed something? That’s Genius.

    Share your repair story with #ImAGenius

    We Are All Geniuses

    Share your repair story with #ImAGenius

결론

To reassemble your device, follow these instructions in reverse order.

Nick

회원 가입일: 2010년 04월 16일

127 평판

안내서 2개 작성하였습니다

Cal Poly, Team 10-42, Garner Spring 2010 Cal Poly, Team 10-42, Garner Spring 2010 회원

CPSU-GARNER-S10S10G42

5 회원들

안내서 10개 작성하였습니다

조회 통계:

지난 24시간: 1

지난 7일: 2

지난 30일: 2

전체 시간: 3,228