Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement

소개

The CPU Cooling Fan hinders the CPU from overheating, potentially causing your computer to crash. Below are specific instructions to remove the CPU Cooling Fan.

필요한 것

1 단계 Battery

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, Battery: 1 단계, 이미지 2개 중 1개

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, Battery: 1 단계, 이미지 2개 중 2개

Push the locking tabs away from each other.

편집

2 단계

Pull up on the battery to remove.

편집

3 단계 RAM

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, RAM: 3 단계, 이미지 2개 중 1개

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, RAM: 3 단계, 이미지 2개 중 2개

Remove the 3mm Phillips #0 screw from the cover.

편집

4 단계

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement: 4 단계, 이미지 3개 중 3개

Use a plastic opening tool to lift up the cover and remove by hand.

편집

5 단계

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement: 5 단계, 이미지 3개 중 3개

Two clips secure the RAM module in place, one on each side. Using your fingers, spread the clips away from the RAM module. 
When released, the RAM module will pop up at a slight angle.
 Lift the RAM module to an angle of about 30 degrees and slide it out.

편집

6 단계 Keyboard

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, Keyboard: 6 단계, 이미지 2개 중 1개

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, Keyboard: 6 단계, 이미지 2개 중 2개

Use a plastic opening tool to pry up the keyboard cover.

편집

7 단계

Use a plastic opening tool to pry up the keyboard.

편집

8 단계

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement: 8 단계, 이미지 3개 중 3개

Lay the keyboard upright against the screen.
Use a spudger to flip up the retaining flap on the keyboard ribbon cable ZIF socket.
Remove the ribbon cable from the socket.

편집

9 단계 CPU Cooling Fan

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, CPU Cooling Fan: 9 단계, 이미지 2개 중 1개

Toshiba Satellite P855-S5102 CPU Cooling Fan Replacement, CPU Cooling Fan: 9 단계, 이미지 2개 중 2개

이 단계에 사용된 도구:

Tweezers

$4.99

구매

Use a set of small tweezers to pull the 10 rubber caps out of the back panel.
Each rubber cap will only fit in the holes they came out of so keep track of which caps go where. If you lose track, there are identification letters and numbers on each cap.