기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Triace A310 Chain Replacement

소개

Whether your chain is too big or broken, this guide will help you get your bike back on the trail.

필요한 것

  1. Triace A310 Chain Replacement, Tire: 1 단계, 이미지 1/1

    • Begin loosening the tire by turning the quick release handle.

    번역하기

  2. Triace A310 Chain Replacement: 2 단계, 이미지 1/2 Triace A310 Chain Replacement: 2 단계, 이미지 2/2

    • Gripping the rear derailleur, pull the arm back, away from the front of the bike.

    • Notice how the derailleur becomes almost vertical in the second picture when compared to the first.

    번역하기

  3. Triace A310 Chain Replacement: 3 단계, 이미지 1/2 Triace A310 Chain Replacement: 3 단계, 이미지 2/2

    • There should be enough slack, in the chain, at this point to remove the tire from the bike.

    • Note: You may need to wiggle the tire and chain around in order to create enough slack.

    • Remove the tire from the bike.

    번역하기

  5. Triace A310 Chain Replacement, Chain: 4 단계, 이미지 1/3 Triace A310 Chain Replacement, Chain: 4 단계, 이미지 2/3 Triace A310 Chain Replacement, Chain: 4 단계, 이미지 3/3

    • Locate the master link along the chain.

    • Note: If the master link matches the one pictured in this step continue with the instructions, if not skip to the next step.

    • With pliers squeeze the two pins together so that the chain comes apart.

    번역하기

  6. Triace A310 Chain Replacement: 5 단계, 이미지 1/3 Triace A310 Chain Replacement: 5 단계, 이미지 2/3 Triace A310 Chain Replacement: 5 단계, 이미지 3/3

    • Note: This step is only for chains with a master link clip.

    • With a plier press the two pins together and remove the clip.

    • Once the clip is removed the chain should easily come apart.

    번역하기

  7. Triace A310 Chain Replacement: 6 단계, 이미지 1/1

    • Once the chain is separated, remove it from the bike by pulling one end.

    번역하기

  8. Triace A310 Chain Replacement: 7 단계, 이미지 1/3 Triace A310 Chain Replacement: 7 단계, 이미지 2/3 Triace A310 Chain Replacement: 7 단계, 이미지 3/3

    • With the new chain, place it on the current gear that your bike is in.

    • Note: If you don't know which gear your bike is in place the chain on one of the middle gears.

    • Thread one end of the chain through the derailleur from top to bottom so it is in the shape of a 'S'.

    • Next place the chain on the back gears, making sure that it is threaded through the guide.

    번역하기

  9. Triace A310 Chain Replacement: 8 단계, 이미지 1/3 Triace A310 Chain Replacement: 8 단계, 이미지 2/3 Triace A310 Chain Replacement: 8 단계, 이미지 3/3

    • To reassemble the chain bring both ends of the chain together so that the pins on each one lineup.

    • Grip the chain on both sides of the master link and pull.

    번역하기

  10. Triace A310 Chain Replacement: 9 단계, 이미지 1/3 Triace A310 Chain Replacement: 9 단계, 이미지 2/3 Triace A310 Chain Replacement: 9 단계, 이미지 3/3

    • If your chain does have a master link clip replace the link around the two pins.

    • Use a plier to slide the clip back into place.

    번역하기
결론

Once your chain is back together, you are ready to once again, hit the trails.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

Jacob Rickman

회원 가입일: 01/26/14

159 평판

안내서 1개 작성함

배지: 8

배지 +5개 더

팀

Cal Poly, Team 1-37, Maness Winter 2014 Cal Poly, Team 1-37, Maness Winter 2014 회원

CPSU-MANESS-W14S1G37

4 회원들

안내서 11개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 694