Tribit XSound Go TS-BTS20 Passive Radiator Replacement

소개

The Tribit XSound Go bluetooth speaker delivers rich, clear, room-filling sound like you've never heard before. Amazing full-range drivers, passive radiators create an auditory experience that's a delight for the senses.

필요한 것

1 단계 Passive Radiator

Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: 1 단계, 이미지 1/2

Tribit XSound Go TS-BTS20 Passive Radiator Replacement, Passive Radiator: 1 단계, 이미지 2/2

Insert a spudger in the seam between the front speaker grill and chassis.
Pry around the perimeter until the front grill releases.
Remove the front grill.

편집

2 단계

Unscrew all the screws with the Phillips screwdriver, on the opened panel.
Lift off the speaker housing.

편집

3 단계

Hold the frame which has the passive radiator in the middle.

편집

4 단계

Use a spudger to push the damaged passive radiator off the frame

편집

5 단계

Insert the new passive radiator into the frame.
The passive bass radiators seal out water from inside the device. Removing them multiple times may compromise the waterproof nature of the speaker.

편집