Skip to main content

소개

This guide will help you replace the case that houses the audio jack in case it is broken or cracked.

  1. Locate the audio control board and the three 1.10 mm screws found on the back. Locate the audio control board and the three 1.10 mm screws found on the back.
    • Locate the audio control board and the three 1.10 mm screws found on the back.

  2. Unscrew the three 1.10 mm screws using a #00  Phillips head screwdriver.
    • Unscrew the three 1.10 mm screws using a #00 Phillips head screwdriver.

  3. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  4. Using a plastic opening tool, insert it between the two plastic pieces to pry it open. Note: The pieces should look like the second picture when it is opened.
    • Using a plastic opening tool, insert it between the two plastic pieces to pry it open.

    • Note: The pieces should look like the second picture when it is opened.

  5. Carefully removed the audio board from casing.
    • Carefully removed the audio board from casing.

    • Replace broken pieces with new ones and reassemble.

결론

To reassemble your device, follow these instructions in reverse order.

Victoria Carlos

회원 가입일: 2017년 10월 02일

219 평판

안내서 2개 작성하였습니다

USF Tampa, Team S1-G3, Thompson Fall 2017 USF Tampa, Team S1-G3, Thompson Fall 2017 회원

USFT-THOMPSON-F17S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 5

전체 시간: 276